Handleiding
Je bekijkt pagina 9 van 26

Fig. 10
u
Undo the soft stop mechanism screw with a T15 screwdriver
approx. 14 mm.
Fig. 10 (1)
u
Insert a screwdriver behind the soft stop mechanism on the
handle side and rotate forwards.
Fig. 10 (2)
u
Remove the soft stop mechanism.
Fig. 10 (3)
4.3.2 Remove the door
For appliances without a soft top mechanism:*
Fig. 11
*
u
Open the door.*
NOTICE
Risk of damage!*
If the door seal is damaged, the door may fail to close properly
and the cooling will be inadequate.
u
Do not damage the door seal with the screwdriver!
u
Remove the outer cover.*
Fig. 11 (1)
u
Disengage and release the bearing bracket cover. Remove
the bearing bracket cover.*
Fig. 11 (2)
u
Unlatch the panel with a slotted screwdriver and swivel it to
one side.*
Fig. 11 (3)
For all appliances:*
Fig. 12
CAUTION
Risk of injury if the door tips!
u
Take good hold of the door.
u
Set down the door carefully.
u
Carefully remove the protective cover.
Fig. 12 (1)
u
Undo the bolt a little with a T15 screwdriver.
Fig. 12 (2)
u
Hold the door and remove the bolts with your fingers.
Fig. 12 (3)
u
Pull the bearing bush out of the guide. Insert from the other
side and click into place.
Fig. 12 (4)
u
Lift the door and set it aside.
u
Carefully lift the plugs out of the door bearing bush with a
slotted screwdriver and remove.
Fig. 12 (5)
4.3.3 Moving the upper bearing parts to the
other side
For all appliances:*
Putting into operation
* Depending on model and options 9
Bekijk gratis de handleiding van Liebherr SGNepes 4365 Premium, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SGNepes 4365 Premium |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 4730 MB |







