Handleiding
Je bekijkt pagina 36 van 52
Starting the alarm simulation
Fig. 140
Fig. 141
u
Carry out action steps according to the illustration.
Fig. 142
Fig. 143
u
Carry out action steps according to the illustration.
w
The simulation has been performed.
w
Connected safety devices should have triggered.
6.2.22 Alarm forwarding
This function enables you to set to have one or several
alarms to be forwarded to an external alarm receiver.
Here, the alarm receiver is connected to the applian‐
ce’s potential-free alarm output. (see 7.3 Interfaces)
You can select from the following settings:
-
Alarm type:
•
Door alarm
•
Temperature alarm
•
Door alarm and temperature alarm
•
All
-
Confirm:
•
Yes: The alarm is confirmed on the appliance and
the externally connected receiver.
•
No: The alarm is confirmed on the appliance and
remains active on the receiver until the error is
remedied.
-
Update (only visible if you have selected “Yes” when
you confirmed):
•
Yes: Alarm repeats.
Temperature alarm depending on the set time
(see 6.2.19 Temperature alarm )
(If you set the delay time of the alarm to “0”,
there will be no alarm repetition at the alarm
relay either.)
Door alarm after 1 or 4 minutes*
(see6.2.20Door alarm )
•
No: Alarm permanently confirmed.
Activating alarm forwarding
Fig. 144
Use
36 * Depending on model and options
Bekijk gratis de handleiding van Liebherr SFTfg 1501 Performance, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SFTfg 1501 Performance |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 6773 MB |
