Liebherr SFNstd 529i Peak NoFrost handleiding

Vriezer

Liebherr

32 pagina's

PDF beschikbaar

Handleiding

Fig. 48 Example illustration of the active IceMaker function

Carry out action steps according to the illustration.

-or-

Deactivate with the SmartDevice app.

IceMaker and MaxIce are deactivated.

If ice cubes are currently being made, the system

completes the process.

The IceMaker goes off automatically.

Deactivating MaxIce

Activate the IceMaker. (see Activating IceMaker )

MaxIce is deactivated.

IceMaker is activated.

To deactivate the IceMaker and MaxIce: (see Deactivating

the IceMaker and MaxIce)

IceMaker water supply

Use this function to set the water supply. The water supply

regulates the amount of water supplied. The water supply

can be changed if it does not match the water pressure and

the ice cube size dispensed.

The water supply is pre-set to value 4 as delivered. A value

from 1 (smallest inflow volume) to 8 (largest inflow volume)

can be selected.

Setting water supply

Make sure that the following requirements are fulfilled:

The IceMaker has been started. (see 4.2 Starting the

IceMaker for the first time)

IceMaker is activated. (see IceMaker / MaxIce )

Fig. 49

Fig. 50 Example illustration: Switch from value 5 to

value6.

Carry out action steps according to the illustration.

The water supply is set.

TubeClean

You can use this function to activate or deactivate Tube‐

Clean. If TubeClean is activated, it cleans the IceMaker lines.

Activating TubeClean

Make sure that the following requirements are fulfilled:

IceMaker cleaning is prepared. (see 9.3.5 Cleaning the

IceMaker)

Empty container with a capacity of 1.5 l and with a

maximum height of 10cm is ready.

Place the container in the drawer under the IceMaker.

Fig.51

Fig.52

Carry out action steps according to the illustration.

TubeClean is activated.

The cleaning process has started: Icon flashes until

the cleaning process is automatically completed after

60 minutes.

When the cleaning process is complete: The device

continues to run in normal mode.

Deactivating TubeClean

TubeClean is automatically ended after 60 minutes.

However, TubeClean can also be deactivated at any time

during the cleaning process:

Fig.53

Carry out action steps according to the illustration.

TubeClean is deactivated: Cleaning process is aborted.

The device continues to run in normal mode.

Status light (status display)*

This function activates and deactivates the status light

(status display). When you start up the appliance, the

status light is deactivated by default. After you have acti‐

vated the status light, the colour of the light indicates the

status of the appliance when the door is closed. When the

door is open, the status light is inactive.

Status light

Status of the appliance

Blue light The appliance is working perfectly.

Controls

* Depending on model and options 15

Bekijk gratis de handleiding van Liebherr SFNstd 529i Peak NoFrost, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.