Handleiding
Je bekijkt pagina 18 van 36
Deactivating the IceMaker / MaxIce
Fig. 47
Fig. 48 Example illustration of the active IceMaker function
u
Carry out action steps according to the illustration.
-or-
u
Deactivate with the SmartDevice app.
w
IceMaker and MaxIce are deactivated.
w
If ice cubes are currently being made, the system
completes the process.
w
The IceMaker goes off automatically.
IceMaker water inflow
Use this function to set the IceMaker water inflow. The
IceMaker water inflow regulates the water inflow
volume. You can adjust the IceMaker water inflow if the
water inflow does not match the water pressure and
the dispensed ice cube size.
Upon delivery, the IceMaker water inflow is set to the
value 5. You can select a value of between 1 (smallest
inflow volume) and 8 (largest inflow volume).
Setting the IceMaker-water inflow
Make sure that the following requirements are fulfilled:
q
IceMaker has been started for the first time.
(see4.2 Starting the IceMaker for the first time)
q
IceMaker is activated. (see IceMaker / MaxIce )
Fig. 49
Fig. 50 Example illustration: Switching from value 5 to
value6.
u
Carry out action steps according to the illustration.
w
IceMaker water inflow is set.
TubeClean
This function activates or deactivates TubeClean. Acti‐
vating TubeClean cleans the IceMaker lines.
Activating TubeClean
Make sure that the following requirements are fulfilled:
q
IceMaker cleaning is prepared. (see 9.3.5 Cleaning
the IceMaker)
q
Empty container with a capacity of 1.5 l (1.59 qt) and
with a maximum height of 10 cm (3 15/16 in) is
ready.
u
Place the container into the drawer below the
IceMaker.
Fig.51
Fig.52
u
Carry out action steps according to the illustration.
w
TubeClean is activated.
w
Cleaning process has started: Symbol flashes until
the cleaning process is automatically completed
after 60 minutes.
w
When the cleaning process is completed: Appliance
continues to run in normal operation.
Deactivating TubeClean
TubeClean is automatically completed after
60 minutes. However, you can also deactivate Tube‐
Clean at any time during the cleaning process:
Use
18 * Depending on model and options
Bekijk gratis de handleiding van Liebherr SF5291, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SF5291 |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 5283 MB |
