Liebherr SBSes 9063 handleiding
Handleiding
Je bekijkt pagina 8 van 40
8
f
eaTures
Setting the Temperature
The appliance is pre-set for normal operation. We recom-
mend temperatures of 38°F (3°C) in the refrigerator and
0°F (-18°C) in the freezer.
To reduce the temperature
Touch the Down icon on the left to reduce the refrigerator
temperature and the Down icon on the right to
reduce the freezer temperature.
Temperature Display
In normal operation, the following settings will be
displayed:
• the average refrigerator temperature
• the warmest frozen food temperature.
When starting up for the first time or
when the appliance is warm, dashes
will appear in the freezer temperature
display, until the temperature in the
freezer compartment is 32°F (0°C).
The display will flash:
• if you change the temperature or
• if the temperature rises by several degrees, indicating
cold loss, e.g. if you place fresh, “warm” food in the
freezer or if you remove or repack frozen food, the tem-
perature may rise for a short time due to warm air flow-
ing into the freezer.
To increase the temperature:
Touch the Up icon on the left to increase the refrigerator
temperature and on the right to increase the freezer
temperature.
• While you are entering the temperature, the set tem-
perature will flash on the display.
• When you touch the temperature setting icons for the
first time, the most recent setting is displayed.
• You can change the settings in increments of 1°F (1°C)
by briefly touching the icons again. If the icons are held,
the temperature setting will change faster.
• Approximately five seconds after the icon has been
released, the display will automatically show the actual
freezing or cooling temperature.
You can change the temperatures:
In the refrigerator between 36°F and 45°F (2°C and 7°C)
and in the freezer between -15°F and 7°F
(-27°C and -14°C).
Switching the Appliance On and Off
Clean the appliance before turning it on for the first time.
See Cleaning. Do not place frozen food in the freezer
until the temperature shows at least 0°F (-18°C).
Switching the appliance on
Touch the Refrigerator On/Off icon or the Freezer On/Off
icon so the temperature displays light up.
• Bleed the water system of the appliance by performing
the steps in chapter “Bleeding the water pipe sys-
tem and resetting the drop symbol on the display”
on page 11.
Switching the refrigerator compartment off
Touch the Refrigerator On/Off icon for approximately
3 seconds.
Note
If the freezer compartment is switched off, the entire
appliance will be switched off.
Bekijk gratis de handleiding van Liebherr SBSes 9063, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SBSes 9063 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4054 MB |
