Liebherr SBSes 9063 handleiding
Handleiding
Je bekijkt pagina 11 van 40
11
o
peraTion
= Water quantity for Ice cube tray
If the produced ice cubes of the ice maker are too small,
the inflowing water quantity can be adjusted.
• Activate the setup mode by touching the SuperFrost
icon for 5 seconds.
• Touch the freezer compartment Down icon until
appears in the freezer temperature display.
• Touch the SuperFrost icon
- the display shows
• Touch freezer compartment Up icon
once only so E 4 appears in the display.
IMPORTANT
Do not increase for more than one step. If the
adjusted value is too high, the ice cube tray of the
ice maker could overflow.
• Touch the SuperFrost icon again.
• Exit setup mode by touching the freezer compartment
On/Off icon.
Check the ice cube size within the next days. If the ice
cubes are still smaller as desired, follow the steps above
again.
= Ice maker function test
Activation by service personnel only.
= Biofresh temperature adjustment
You can adjust the temperature in the BioFresh drawers.
• Activate the setup mode by touching the SuperFrost
icon for 5 seconds.
• Touch the freezer compartment Down icon until
appears in the freezer temperature display.
• Touch the SuperFrost icon
- the display shows
• Touch freezer compartment Up/Down icons to
select
6 - 9 to increase the temperature,
4 - 1 to reduce the temperature.
IMPORTANT
At values b4 - b1 the temperature in the drawers
can drop below 32°F (0°C). Stored goods could
freeze.
• Touch the SuperFrost icon at the desired value.
• Exit setup mode by touching the freezer compartment
On/Off icon.
= Bleeding the water pipe system and resetting
the drop symbol on the display
After the appliance has been switched on for the first
time or the water filter (optional accessory) has been
renewed, follow these steps to bleed the water pipe
system. This is important for proper operation of the ice
maker.
The drop symbol on the display lights up in regular
intervals to remind you to change the water filter. If a
new water filter is fitted, the drop symbol can be reset if
desired to start a new interval.
There will be no functional issue if the drop symbol in the
display is not reset.
• Remove the IceMaker drawer (top left drawer in the
freezer compartment) and empty. Reinsert the drawer
and close the appliance door.
• Activate the setup mode by touching the SuperFrost
icon for 5 seconds.
• Touch the freezer compartment Up icon until
appears in the freezer temperature display.
• Touch the SuperFrost icon
- the display shows
• Touch the freezer compartment Up icon
- the display shows
• Touch the SuperFrost icon. The water intake of the
appliance opens for 25 seconds and bleeds all air from
the pipe system.
-
flashes in the display.
• Touch the SuperFrost icon
- the display shows
• Touch the SuperFrost icon again
- the display shows
• The drop symbol disappears.
• Exit setup mode by touching the
freezer compartment On/Off icon.
• Remove the IceMaker drawer, empty it and dry with
a cloth. Reinsert the drawer and close the appliance
door.
Bekijk gratis de handleiding van Liebherr SBSes 9063, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | SBSes 9063 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4054 MB |
