Handleiding
Je bekijkt pagina 21 van 38
Message Cause Exit the
message
Power outage
alarm
The message appears
if the freezing temper‐
ature has risen due to
a power failure.
Carry out action
steps
(see Power
outage alarm) .
Temperature
alarm
The message appears
if the freezing temper‐
ature does not corre‐
spond to the set
temperature.
Carry out action
steps
(see Tempera‐
ture alarm) .
Error
The message appears
if there is an appliance
error. A component of
the appliance has a
fault.
Carry out action
steps
(see Error) .
7.3.2 Ending warnings
Door alarm
Fig. 93 Example illustration
u
Carry out action steps according to the illustration.
-or-
u
Close the door.
w
The display returns to the status indicator.
You can set how long the door may be open before the door
alarm sounds. (see Setting the door alarm)
Power outage alarm
When the power failure has ended, the appliance cools
down to the previously set target temperature.
Fig. 94 Example illustration
u
Press the confirmation symbol.
w
Warmest freezing temperature is displayed.
w
If the freezing temperature was below -9 °C: Food can
still be consumed.
If the freezing temperature has risen above -9°C:
u
Check the food.
u
Press the confirmation symbol.
w
The display returns to the status indicator: Current
temperature and target temperature are displayed.
Temperature alarm
Temperature differences can be caused by:
-
You have put in warm, fresh food.
-
Too much warm air has got in while you were sorting out
the freezer or removing items.
-
There has been a longer power failure.
-
The appliance is faulty.
u
Eliminate causes.
w
The appliance cools to the target temperature set previ‐
ously.
Fig. 95 Example illustration
u
Press the confirmation symbol.
w
Warmest freezing temperature is displayed.
w
If the freezing temperature was below -9 °C: Food can
still be consumed.
If the freezing temperature has risen above -9°C:
u
Check the food.
u
Press the confirmation symbol.
w
The display returns to the status indicator: Current
temperature and target temperature are displayed.
Error
Fig. 96 Example illustration
u
Press the confirmation symbol.
w
Error code is displayed.
u
Note the error code.
u
Press the confirmation symbol.
w
The display returns to the status indicator.
u
Contact Customer Service. (see 10.4 Customer Service)
7.3.3 Overview of reminders
Behaviour of the appliance during reminders:
-
Reminder appears on the display.
-
Alarm tone sounds.
-
The interior lighting pulsates for some reminders.
Message
Cause Exit the message
*
Fill the water
tank*
The message
appears if the
IceMaker is acti‐
vated but there is
not enough water
in the water tank.*
Carry out action
steps (see Fill the
water tank*) .*
Controls
* Depending on model and options 21
Bekijk gratis de handleiding van Liebherr IKGS 51Ve03 Pure, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | IKGS 51Ve03 Pure |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5903 MB |
