Handleiding
Je bekijkt pagina 21 van 38
Power outage alarm
When the power failure has ended, the appliance will auto‐
matically cool down to the previously set target tempera‐
ture without you having to confirm the message. However,
for the message to disappear from the display, you must
confirm it.
Fig. 97 Example illustration
► Press the confirmation symbol.
▷ Warmest freezing temperature is displayed.
▷ If the freezing temperature was below -9 °C: Food can
still be consumed.
If the freezing temperature has risen above -9°C:
► Check the food.
► Press the confirmation symbol.
▷ The display returns to the status indicator: Current
temperature and target temperature are displayed.
Temperature alarm
Temperature differences can be caused by:
-
You have put in warm, fresh food.
-
Too much warm air has got in while you were sorting out
the freezer or removing items.
-
There has been a longer power failure.
-
The appliance is faulty.
► Eliminate causes.
▷ The appliance cools to the target temperature set previ‐
ously.
Fig. 98 Example illustration
► Press the confirmation symbol.
▷ Warmest freezing temperature is displayed.
▷ If the freezing temperature was below -9 °C: Food can
still be consumed.
If the freezing temperature has risen above -9°C:
► Check the food.
► Press the confirmation symbol.
▷ The display returns to the status indicator: Current
temperature and target temperature are displayed.
Error
Fig. 99 Example illustration
► Press the confirmation symbol.
▷ Error code is displayed.
► Note the error code.
► Press the confirmation symbol.
▷ The display returns to the status indicator.
► Contact Customer Service. (see 10.4 Customer Service)
7.3.3 Overview of reminders
Behaviour of the appliance during reminders:
-
Reminder appears on the display.
-
Alarm tone sounds.
-
The interior lighting pulsates for some reminders.
The following reminders can be deactivated (see Deacti‐
vating the reminder) :
-
Replace the FreshAir activated carbon filter
Message
Cause Exit the message
*
Fill the water
tank*
The message
appears if the
IceMaker is acti‐
vated but there is
not enough water in
the water tank.*
Carry out action
steps (see Fill the
water tank*) .*
*
Insert the
IceMaker
drawer*
The message
appears if the
IceMaker is acti‐
vated but the
IceMaker drawer is
open.*
Carry out action
steps (see Insert
the IceMaker
drawer*) .*
Replace the
FreshAir acti‐
vated carbon
filter
The message
appears when the
FreshAir activated
carbon filter needs
to be replaced.
Carry out
action steps
(see Replace the
FreshAir activated
carbon filter) .
7.3.4 Ending reminders
Fill the water tank*
Fig. 100 Example illustration
► Press the confirmation symbol.
► Fill the water tank.
Controls
* Depending on model and options 21
Bekijk gratis de handleiding van Liebherr ICN 5103 Pure, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | ICN 5103 Pure |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5643 MB |
