Handleiding
Je bekijkt pagina 16 van 38
More information on cleaning the
lines of the IceMaker:
(see TubeClean *)
If the function is active, the device operates at higher
power. As a result, the device's operating noise may be
temporarily louder and energy consumption will increase.
Activating IceMaker
Make sure that the following requirements are fulfilled:
❑
IceMaker is put into operation. (see 8.9 IceMaker*)
❑
Water tank is filled. (see 8.9.1 Fill the water tank*) *
Fig.57
Fig.58
► Carry out action steps according to the illustration.
▷ IceMaker is activated. It can take up to 24 hours for the
IceMaker to produce the first ice cubes.
Deactivating IceMaker
Make sure that the following requirements are fulfilled:*
❑
Water tank is empty. (see 8.9 IceMaker*)
Fig. 59
Fig.60
► Carry out action steps according to the illustration.
▷ IceMaker is deactivated.
▷ If ice cubes are currently being made, the system
completes the process.
▷ The IceMaker goes off automatically.
MaxIce*
Use this function to increase the amount of ice cubes
produced by the IceMaker. MaxIce is automatically deacti‐
vated after 48 hours. However, you can also deactivate
MaxIce manually at any time: (see Deactivating MaxIce) .
More information on the
number of ice cubes:
(see 10.1 Technical specifi‐
cations)
Activating MaxIce
If you activate MaxIce and have not previously activated
the IceMaker (see IceMaker *) function, then by pressing
MaxIce you can also automatically activate the IceMaker
function.
If you have not yet activated the IceMaker function, make
sure that the following requirements are met:
❑
IceMaker is put into operation. (see 8.9 IceMaker*)
❑
Water tank is filled. (see 8.9.1 Fill the water tank*) *
Fig.61
Fig. 62
► Carry out action steps according to the illustration.
▷ MaxIce is activated.
▷ If you have not activated the IceMaker function before:
IceMaker is activated.
Deactivating MaxIce
If you deactivate MaxIce, then the IceMaker function is still
activated.
Fig.63
Fig.64
► Carry out action steps according to the illustration.
▷ MaxIce is deactivated.
TubeClean *
You can use this function to activate or deactivate Tube‐
Clean. If TubeClean is activated, it cleans the IceMaker lines.
Activating TubeClean
Make sure that the following requirements are fulfilled:
❑
IceMaker cleaning is prepared. (see 9.5.5 Cleaning the
IceMaker*)
❑
Empty container with a capacity of 1.5 l and with a
maximum height of 10cm is ready.
► Place the container in the drawer under the IceMaker.
Controls
16 * Depending on model and options
Bekijk gratis de handleiding van Liebherr ICN 5103 Pure, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | ICN 5103 Pure |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5643 MB |
