Liebherr CNdgd 5203 Pure handleiding

36 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 25 van 36
Fig. 114
Lift VarioSafe at the front.
Fig. 115
Pull VarioSafe forwards Fig. 115 (1) until the recesses in
the side of the VarioSafe are at the level of the support
rib in the fridge section. Fig. 115(2)
Fig. 116
Set VarioSafe in refrigerator compartment at an angle.
Fig. 116(1)
Take VarioSafe out to the front. Fig. 116(2)
VarioSafe is removed.
8.4.5 Disassembling the VarioSafe
You can disassemble the VarioSafe into its individual parts if
you want to clean the VarioSafe or if you need to install or
remove parts.
Fig.117
Remove VarioSafe as a whole. (see 8.4.4 Removing the
VarioSafe )
Disassemble VarioSafe according to the illustration.
8.5 Drawers
You can remove the drawers for cleaning.
You can remove the drawers to use VarioSpace.
The way to remove/insert the drawers varies depending
on the pull-out system. Your appliance can contain various
pull-out systems.
Note
The energy consumption increases and the cooling power
goes down if ventilation is not sufficient.
Leave the bottom drawer in the appliance!
Always leave the fan air vents clear on the back wall!
8.5.1 Drawer on appliance base or glass shelf
The drawer runs directly on the appliance base or on a glass
shelf. There are no rails.
When you remove the drawers, you can use the glass
shelves below them as storage shelves.
Removing drawer
Fig. 118
Remove drawer as shown in the illustration.
Inserting drawer
Fig. 119
Insert drawer as shown in the illustration.
Features
* Depending on model and options 25

Bekijk gratis de handleiding van Liebherr CNdgd 5203 Pure, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkLiebherr
ModelCNdgd 5203 Pure
CategorieKoelkast
TaalNederlands
Grootte5521 MB