Handleiding
Je bekijkt pagina 12 van 36
Setting the temperature in the freezer section
Fig. 21 Example illustration
► Carry out action steps according to the illustration.
▷ Temperature is set.
Temperature unit
Use this function to set the temperature unit. You can set
degrees Celsius or degrees Fahrenheit as the temperature
unit.
Setting the temperature unit
Fig.22
Fig. 23 Example illustration: Switch from degreesCelsius
to degrees Fahrenheit.
► Carry out action steps according to the illustration.
▷ The temperature unit is set.
D-Value*
Use this function to set the D-Value.
The D-Value specifies whether you are operating your fridge
section with a dry rear wall or without a dry rear wall. The
rear wall is installed in the appliance as delivered. The D-
Value is pre-set to D1.
You can remove the rear wall for cleaning.
(see 9.5.4 Cleaning the dry rear panel*) In order to operate
the appliance without a rear wall, you must set the D-Value
to D2.
Note
The declared energy consumption was determined without
a dry rear wall. The appliance is fully functional with a dry
rear wall but its energy consumption will be slightly higher.
Liebherr recommends:
► Operate the appliance with a dry rear wall in order to
prevent visible condensate and the food freezing.
Setting the D-Value
Fig. 24
Fig. 25 Example illustration: Switch from D1 to D2.
► Carry out action steps according to the illustration.
▷ The D-Value is set.
SuperCool
You can use this function to activate or deactivate Super‐
Cool. If SuperCool is activated, then the appliance increases
the cooling capacity. It allows you to achieve lower cooling
temperatures. You can activate SuperCool when you would
like to cool a large quantity of food quickly.
If the function is active, the appliance operates at higher
power. As a result, the appliance's operating noise may be
temporarily louder and energy consumption will increase.
Activating SuperCool
Time for activation of the function:
-
When you would like to store fresh food in the fridge
section: Activate the function when inserting food.
Fig. 26
Fig.27
► Carry out action steps according to the illustration.
▷ SuperCool is activated.
Controls
12 * Depending on model and options
Bekijk gratis de handleiding van Liebherr CNdgd 5203 Pure, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liebherr |
| Model | CNdgd 5203 Pure |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5521 MB |
