Liebherr C7620 handleiding

42 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 19 van 42
Fig. 48 Example illustration: Switching from value 5 to
value6.
u
Carry out action steps according to the illustration.
w
IceMaker water inflow is set.
MaxIce*
Use this function to increase the number of ice cubes
in the IceMaker.
More information on the
number of ice cubes:
(see 10.1 Technical speci‐
fications)
Activating MaxIce
If you activate MaxIce and have not previously acti‐
vated the IceMaker (see IceMaker *) function, then by
pressing MaxIce you can also automatically activate
the IceMaker function.
If you have not yet activated the IceMaker function,
make sure that the following requirements are met:
q
IceMaker is put into operation. (see 8.10 IceMaker*)
Fig. 49
Fig.50
u
Carry out action steps according to the illustration.
w
MaxIce is activated.
w
If you have not activated the IceMaker function
before: IceMaker is activated.
Deactivating MaxIce
If you deactivate MaxIce, then the IceMaker function is
still activated.
Fig.51
Fig.52
u
Carry out action steps according to the illustration.
w
MaxIce is deactivated.
TubeClean *
This function activates or deactivates TubeClean. Acti‐
vating TubeClean cleans the IceMaker lines.
Activating TubeClean
Make sure that the following requirements are fulfilled:
q
IceMaker cleaning is prepared. (see 9.4.6 Cleaning
the IceMaker*)
q
Empty container with a capacity of 1.5 l (1.59 qt) and
with a maximum height of 10 cm (3 15/16 in) is
ready.
u
Place the container into the drawer below the
IceMaker.
Fig.53
Fig.54
u
Carry out action steps according to the illustration.
w
TubeClean is activated.
w
Cleaning process has started: Symbol flashes until
the cleaning process is automatically completed
after 60 minutes.
w
When the cleaning process is completed: Appliance
continues to run in normal operation.
Deactivating TubeClean
TubeClean is automatically completed after
60 minutes. However, you can also deactivate Tube‐
Clean at any time during the cleaning process:
Use
* Depending on model and options 19

Bekijk gratis de handleiding van Liebherr C7620, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkLiebherr
ModelC7620
CategorieNiet gecategoriseerd
TaalNederlands
Grootte6076 MB