Liberty DL-SCU33-SW handleiding
Handleiding
Je bekijkt pagina 19 van 26
USER MANUAL / DL-SCU33-SW
19
Command Function Command & Feedback Example
>GetEDID Get the EDID mode >GetEDID
<EDID
IN 01 02 03 04
STA 01 01 01 01
>SetPower Param Enter/exit standby mode
Param = On, O
O - Power o
On - Power on
>SetPower On
<Power On
>GetPower Get the standby status >GetPower
<Power On
>SetIOMode Param Set Contact I/O mode
Param = 1 ~ 2
1 - IO Mode 1
2 - IO Mode 2
>SetIOMode 1
<IOMode 1
>GetIOMode Get Contact IO mode >GetIOMode
<IOMode 1
>SetCtlCecOn Param Enable/Disable CEC control
Param = ON,FF
ON - ON
FF - OFF
>SetCtlCecOn
<SetCtlCecOn ON
>GetCtlCecOn Get CEC control status >GetCtlCecOn
<GetCtlCecOn ON
>SetSchedule
<Param1,Param2,
Param3,Param4,
Param5,Param6,
Param7,Param8,
Param9,Param10,
Param10>
Set Schedule time
Param1 = 0 ~ 24(hour)
Param2 = 0 ~ 60(min)
Param3 = 0 ~ 24(hour)
Param4 = 0 ~ 60(min)
Param5 = 0 ~ 1(Sun)
Param6 = 0 ~ 1(Mon)
Param7 = 0 ~ 1(Tues)
Param8 = 0 ~ 1(Wed)
Param9 = 0 ~ 1(Turs)
Param10 = 0 ~ 1(Fri)
Param11 = 0 ~ 1(Sat)
>SetSchedule <1,0,1,0,0,1,1,1,1,1,1>
<SetSchedule <1,0,1,0,0,1,1,1,1,1,1>
>GetSchedule Get Schedule time >GetSchedule
<Time: 1,0,1,0,0,1,1,1,1,1,1>
>SetDaylight Param Set Daylight on/o
Param = On, O
O - Power o
On - Power on
>SetDaylight On
<Daylight On
>GetDaylight Get Daylight on/o >GetDaylight
<Daylight On
>SetTime
<Param,Param1,Para
m2,Param3,Param4,P
aram5>
Initialize the time setting
Param = 1970 ~ 2099(year)
Param1 = 1 ~ 12(month)
Param2 = 1 ~ 31(date)
Param3 = 0 ~ 24(hour)
Param4 = 0 ~ 60(min)
Param5 = 0 ~ 60(sec)
>SetTime <2020,1,1,1,1,1>
<SetTime <2020,1,1,1,1,1>
RS232 CONTROL COMMANDS
Bekijk gratis de handleiding van Liberty DL-SCU33-SW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Liberty |
| Model | DL-SCU33-SW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4362 MB |