LG WT8600WH handleiding
Handleiding
Je bekijkt pagina 46 van 64
46 TROUBLESHOOTING
Unbalance The load is too small.
• Add additional items to allow the washer to balance the load.
Heavy articles are mixed with lighter items.
• Always try to wash articles of somewhat similar weight to allow the washer to evenly
distribute the weight of the load for spinning.
The load is out of balance.
• Manually redistribute the load if articles have become tangled, preventing the automatic
rebalancing from working properly.
No water detected The water level sensor is not working correctly.
• Close the water faucets, unplug the washer, and call for service.
Motor error A motor error has occurred.
• Allow the washer to stand for 30 minutes and then restart the cycle.
• If the error code is still displayed, call for service.
Foreign objects such as coins, pins, clips, etc., are caught between the pulsator and the
inner tub.
• Turn the washer off then on again. Select the Spin Only cycle to drain and spin the load.
• When the Spin Only cycle is completed, empty the tub and find and remove any objects
caught in the pulsator.
• Always check pockets, etc., before washing to prevent error codes or damage to the
washer or clothing.
Water too high Water level is too high due to a faulty water valve.
• Close the water faucets, unplug the washer, and call for service.
Clutch error Clutch error
• Mechanical failure
• Unplug the washer and call for service.
No temp detected Control error
• Unplug the washer and wait 60 minutes. Reconnect power and try again.
• If the error code is still displayed, call for service.
Voltage abnormality Supply voltage is not correct.
• Please call LG service center. You can find your local LG service center phone number on
the back cover page.
Control Lock The control lock function is on to prevent anyone from changing cycles or operating
the washer.
• Turn off the control lock function in the control panel. See Control Lock under Options
and Extra Functions.
Drain Feature Special drain feature
• If the washer is paused during a cycle for more than 4 minutes, the cycle will be canceled
and any water remaining in the tub will be drained.
• This is not an error code. It indicates that the drain function is operating.
Tub Clean It is time to run the Tub Clean cycle.
• This is not an error code. It indicates that the Tub Clean cycle is running or needs to be run
to clean the washer tub.
Problem Possible Cause & Solution
Bekijk gratis de handleiding van LG WT8600WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | WT8600WH |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5742 MB |
