Handleiding
Je bekijkt pagina 40 van 52

40
MAINTENANCE
CAUTION
• Remove the baking tray, deep baking tray, wire
grill, all cookware, aluminum foil or any other
material from the oven.
• The oven displays an
F
error code and sounds
three long beeps during the
Pyrolysis
cleaning
process if it malfunctions in the
Pyrolysis
mode.
Switch off the electrical power to the main fuse
or breaker and have the oven serviced by a
qualified technician.
• If the
Pyrolysis
mode malfunctions, turn the
oven off by pressing the
Pause&Stop
button and
disconnect the power supply. Have it serviced by
a qualified technician.
• It is normal for parts of the oven to become hot
during a
Pyrolysis
cycle. Avoid pressing the
door, window or oven vent area during a
Pyrolysis
cycle.
• Do not leave small children unattended near the
appliance. During the
Pyrolysis
cycle, the
outside of the oven can become very hot to
touch.
• If you have pet birds, move them to another well-
ventilated room. The health of some birds is
extremely sensitive to the fumes given off during
the
Pyrolysis
cycle of an oven.
• Do not force the door open. This can damage the
automatic door locking system. Use care when
opening the oven door after the
Pyrolysis
cycle.
Stand to the side of the oven when opening the
door to allow hot air or steam to escape. The
oven may still be VERY HOT.
NOTE
• The oven light cannot be turned on during a
Pyrolysis
cycle. The oven light cannot be turned
on until the oven temperature has cooled below
250 ℃ after a
Pyrolysis
cycle is complete.
• Clean the frame of the oven and door with hot
soapy water. Rinse well.
• Do not clean the gasket. The fiberglass material
of the oven door gasket cannot withstand
abrasion. It is essential for the gasket to remain
intact. If you notice it becoming worn or frayed,
replace it by a service technician .
• It is normal for the fan to operate during the
Pyrolysis
cycle.
• As the oven heats, you may hear sounds of metal
parts expanding and contracting. This is normal
and will not damage the oven.
• You may notice some white ash in the oven. Wipe
it off with a damp cloth or a soap-filled steel wool
pad after the oven cools. If the oven is not clean
after one
Pyrolysis
cycle, repeat the cycle.
• After a
Pyrolysis
cycle, fine lines may appear in
the porcelain because it went through heating
and cooling. This is normal and will not affect
performance.
• The
Pyrolysis
cycle cannot be started if the
Control Lock
feature is active.
• Once the
Pyrolysis
cycle is set, the oven door
locks automatically. You will not be able to open
the oven door until the oven is cooled. The lock
releases automatically.
• Once the door has been locked, the lock
Ì
indicator light stops flashing and remains on.
Allow about 15 seconds for the oven door lock to
activate.
When to Use Pyrolysis
• Example of oven soiling
Case 1
• Soil pattern: Medium to heavy splatter
• Types of soils: Fat/grease
• Common food items that can soil your oven:
Meat roasted at high temperatures
Bekijk gratis de handleiding van LG WS5D7230S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | LG |
Model | WS5D7230S |
Categorie | Oven |
Taal | Nederlands |
Grootte | 4035 MB |