LG WM5800HVA handleiding
Handleiding
Je bekijkt pagina 36 van 64
36 SMART FUNCTIONS
NOTE
• The appliance supports 2.4 GHz Wi-Fi networks
only. To check your network frequency, contact
your Internet service provider or refer to your
wireless router manual.
• LG ThinQ is not responsible for any network
connection problems or any faults, malfunctions,
or errors caused by network connection.
• The surrounding wireless environment can
make the wireless network service run slowly.
• If the appliance and the wireless router are too
far apart, the signal becomes weak. It may take a
long time to connect or fail to install the
application.
• If the appliance is having trouble connecting to
the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
• The network connection may not work properly
depending on the Internet service provider.
• The Wi-Fi may not connect or the connection
may be interrupted because of the home
network environment.
• If the appliance cannot be connected due to
problems with the wireless signal transmission,
unplug the appliance and wait about a minute
before trying again.
• If the firewall on your wireless router is enabled,
disable the firewall or add an exception to it.
• The wireless network name (SSID) should be a
combination of English letters and numbers. (Do
not use special characters.)
• Smartphone user interface (UI) may vary
depending on the mobile operating system (OS)
and the manufacturer.
• If the security protocol of the router is set to
WEP, network setup may fail. Change the
security protocol (WPA2 is recommended), and
connect the product again.
Using the Appliance Remotely
Remote Start
Use a smartphone to control your appliance
remotely. You can also monitor your cycle
operation so you know how much time is left in the
cycle.
Using Remote Start
1 Put the laundry in the drum. Add detergent to
the detergent dispenser drawer.
• If desired, add bleach to the appropriate
section of the dispenser.
2 Press the Power button.
3 Press the Remote Start button to enable the
remote control function.
4 Start a cycle from the LG ThinQ application on
your smartphone.
NOTE
• Once this function is enabled, you can only start
a cycle from the LG ThinQ smartphone
application. If the cycle is not started, the
appliance will wait to start the cycle until it is
turned off remotely from the application or the
remote function is disabled.
• If the door has been opened, you cannot start a
cycle remotely.
Disabling Remote Start Manually
When the function is activated, press the Remote
Start button.
Radio Equipment Specifications
To identify the RF module installed in the
appliance, refer to the label attached to the
appliance.
† This feature is only available on some models.
FCC Notice
The following notice covers the transmitter
module contained in this product.
Type
Operating Frequency
Range
Output
Power
(Max.)
Wireless
LAN
2400 MHz - 2472 MHz
< 1 W
Bluetooth
†
2400 MHz - 2483.5 MHz
Bekijk gratis de handleiding van LG WM5800HVA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | WM5800HVA |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5687 MB |
