LG WB21LMC handleiding
Handleiding
Je bekijkt pagina 16 van 28
16
ENGLISH_index
Japan
1. Use the stud nder to locate and mark the center
of the wall stud.
Drywall
Wood stud
455 mm (17.9 inches)
2. After aligning the wall mount and Wall mounting
supporter assembly (wall mount assembly) on
the wall where the center of the wood stud is
marked, mark the position of the screw and
remove the wall mount assembly. (Use a level to
make sure that the screw marks are horizontal.)
3. Using a Ø 4 mm wood drill bit, drill a hole 76 mm
(2.9 inches) or deeper into the screw locations
marked on the wall for the wall mount. (Clean the
drill holes)
Drywall
Wood stud
76 mm / 2.9 inches
4. Position the wall mount assembly so that it ts
over the drilled holes. Tighten the wall mount
screws for the Wall mounting xing screws into
the drill holes. At this time, tighten the screws so
that the wall, wall mounting assembly, and wall
mount support screws are in close contact with
each other.
- Be careful, since excessive tightening can damage
drywalls.
- When tightening the screws, use a Phillips head
screwdriver. (manual or electric)
Screws for Fixing The Wall
Mounting Supporter
Bekijk gratis de handleiding van LG WB21LMC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | WB21LMC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2666 MB |
