Handleiding
Je bekijkt pagina 14 van 56
14
EN
OPERATION INSTRUCTIONS
Operation Modes
Selecting Mode a
Each time MODE button is pressed, the operation mode is changed
in sequence:
COOLING DRY FAN ONLY HEATING
NOTE
• Heating mode is not available for cooling only air conditioner.
FAN Mode b
Each time the “Fan Speed” button is pressed, the fan speed is
changed in sequence:
Auto High Medium Low
NOTE
• At “Fan Only” mode, only “High”,”Medium” and “Low” are
available.
• At “Dry” mode, Fan speed is set at “Auto” automatically, “Fan
Speed” button is ineffective in this case.
Dual
Sensing
Mode
Light
Off
Fan
Speed
Smart
Cloc
kS
leep
Swing Swing
Jet
Mode
Room
Temp
Timer
Off
Timer
On
Temp.
Setting Temperature c
Press once to raise temperature setting by 1 °C
Press once to lower temperature setting by 1 °C
Range of available set temperature
*Heating, Cooling 16
°C
~ 30
°C
*Dry
Inverter -7 ~ 7
Non-Inverter -2 ~ 2
Fan Only Unable to set
NOTE
• Heating mode is not available for cooling only models.
• At “Dry” mode, the unit can decrease or rise 2 °C if you still feel uncomfortable.
Turning On d
Press button, when the appliance receives the signal, the indicator of the indoor unit lights up.
NOTE
• Swing, Smart, Timer On, Timer Off, Clock, Sleep and Jet Mode operation modes will be specified in the
following pages.
• Changing modes during operation, sometimes the unit does not response at once. Wait 3 minutes.
• During heating operation, air flow is not discharged at the beginning. After 2-5 minutes, the air flow will
be discharged until temperature of indoor heat exchanger rises.
• Wait 3 minutes before restarting the appliance.
Bekijk gratis de handleiding van LG T36ZCA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | T36ZCA |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5214 MB |
