LG Studio SDNTHS72S handleiding

Wasmachine

2 pagina's

PDF beschikbaar

Handleiding

LG STUDIO

HOME APPLIANCES

SDNTHS72S

© 2024 LG Electronics USA, Inc. All rights reserved. "LG Life’s Good" is a registered trademark of LG Corp. All other product and brand names are trademarks or registered trademarks of their respective owners. Design, features and specifications are subject to

change without notice. Non-metric weights and measurements are approximate. Some features may require Internet access. Content and services may vary by product and are subject to change without notice. 5/13/2

DIMENSIONS

Product (W x H x D) 23 3/4” x 33 5/8” x 23 3/4”

Depth with Door Closed (Handle) 23 3/4” (603mm) / 26 1/8” (664mm)

Depth with Door Open 48 1/2”

Carton Dimensions (W x H x D) 28 1/32” x 29 5/8” x 34 7/8”

Clearance (W x H x D) 24” x 24” x 33 5/8”

Weight (Unit / Carton) 93lbs / 104lbs

Container Stufng Quantity 140

Depth when lower door is fully opened 42 3/16” (1072.2mm)

23 /4" (603 mm)

9 /8"

(238 mm)

4 /16"

(119 mm)

(134 mm)

4 /2"

(115 mm)

33 /16"

(846 mm)

4 /2"

(115 mm)

33 /8"

(854 mm)

/ " (

mm)

" ( mm)

/4" (6 mm)

/2" (114 mm)

(654 -6 mm)

" - 25

15/16"

• This dishwasher is designed to fit a standard dishwasher opening. An opening

may be needed on both sides to route plumbing and electrical connections.

• Select a location as close to the sink as possible for easy connections to

water supply line, drain hose and electrical connection.

• To ensure proper drainage, install the dishwasher no

more than 12 ft. (3.65 m) from the sink.

• The location must have sufficient space for the dishwasher door to open

easily and provide at least 0.1" (2 mm) between the dishwasher and the cabinet

sides.

• If installing the dishwasher in a corner, leave a minimum of 2" (50 mm)

between the dishwasher and the adjacent wall.

The adjacent wall must be free of obstructions.

• To allow for proper clearance of plumbing and electrical, use the template

included with the literature to determine the clearance on the side of the

cabinet where the cabinet

meets the back wall. Using a 2 1/2" diameter hole saw, drill a hole in the target

area as shown on the template.

• If an extension drain hose is required, use a 5/8" or 7/8" inside diameter, 2–3

ft. length hose and a coupler for connecting the two hose ends.

• For flush installations only, you may remove the cabinet brace inside the

cabinet.

Water Supply Line

Elctrical Cable

Bekijk gratis de handleiding van LG Studio SDNTHS72S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.