LG PuriCare AeroTower U10CS1H handleiding
Handleiding
Je bekijkt pagina 21 van 43
21OPERATION
ENGLISH
• During heating, only the Wide Mode can be
used.
WARNING
• Some parts of this product become very hot and
may cause burns.
CAUTION
• During heating, be careful not to use other
electric heating appliances. If other electric
heating appliances are used at the same time
during heating, the circuit breaker may trip.
NOTE
• Press the Target Temperature Setting button
on the remote control to select a temperature
from 60
8 to 86 8 (16 °C to 30 °C).
• When you start heating after installing the
product for the first time, it operates at 86
8 (30
°C) with the fan speed at level 5.
• If the current air temperature is higher than the
target temperature, the product operates as
follows:
- The heater inside the product stops working.
- The heating icon on the status display turns
white.
• If the target temperature is set lower than the
current air temperature when you start heating,
the heating will be carried out for a set period of
time. Then the product will operate at the target
temperature, so heating may not be supplied. If
heating is not supplied, set the target
temperature higher than the current ambient air
temperature.
• If the current ambient temperature is lower than
the target temperature, the product operates as
follows:
- The heater inside the product starts working.
- The heating icon on the status display turns
red.
• Excessive electricity bills may result if heating is
used for a long time. (Rated power consumption
during is 1500 W.)
• When you stop and restart heating, the product
starts at the last set temperature.
• Heating auto-block function: Heating can work
continuously for up to 8 hours, but it turns off
automatically after 8 hours of operation. To
restart it, press the Heating button.
• Residual heat removal function: When you turn
off the power during heating, the residual heat
removal works to get rid of the residual heat
inside the product.
- The heating icon on the status display turns
white.
- Time counts down from 60 seconds ( 60
~ 59
~ 58.......2 ~ 1 ~ 0)
- When the time reaches 0, the product turns
off.
• During heating, there may be an odor from the
heat generated in the air outlet. The odor will
naturally disperse over time.
• The following types of noise are normal and do
not indicate a malfunction:
- Ticking, clicking, or popping noises may be
generated from contraction and expansion
due to temperature differences in the plastic.
- Clanging or clanking noises may be generated
from contraction and expansion due to the
temperature differences in the heater.
- Clunking noises may be generated by the
heater switch operating during heating.
Using the Extra Functions
Setting the Sleep Timer
Set the timer to turn the product off automatically
after a specific time.
•Press the Sleep Timer button during operation
to set the sleep timer in the order of 1H (turn off
1 hour later) ~ 12H (turn off 12 hours later)
~
OF (cancel)
Bekijk gratis de handleiding van LG PuriCare AeroTower U10CS1H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | PuriCare AeroTower U10CS1H |
| Categorie | Luchtreiniger |
| Taal | Nederlands |
| Grootte | 4111 MB |
