Handleiding
Je bekijkt pagina 14 van 40
14 INSTALLATION
2 Carefully lift the blower unit out of the
microwave oven.
3 Use side cutters or tin snips to cut out and
remove the knockouts b from the back plate
a. Be careful not to distort the back plate.
Discard the knockouts.
4 To avoid pinching the blower wire, make sure
that it is channeled underneath and between
the two exhaust ports when they are rotated.
5 Rotate and reinstall the blower unit a so that
the exhaust ports b face the rear of the
cabinet and are aligned with the rear
knockouts. When you insert the blower unit,
the blower wire c must be routed as shown.
6 Attach the blower plate d to the microwave
oven so the blower unit exhaust ports
c and
blower plate opening are aligned. Attach one
or two blower unit mounting screw(s)
f and
then one or several blower plate mounting
screw(s)
a.
b Blower unit
e Back plate
7 Insert the tabs on each side of the damper
into the holes at the inside rear of the
adapter. Attach the exhaust adapter a to the
back plate wall side. Push in securely until it is
past the top locking tabs c and in the lower
locking tabs
c. Make sure that the damper
hinge is at the top and that the damper
swings freely.
b Damper (hinge side up)
d Guides on back plate
e Slide exhaust adapter into guides on back
plate.
Roof-Venting Installation
1 Follow steps 1 and 2 under Wall-Venting
Installation.
2 Rotate and reinstall the blower unit a so that
the exhaust ports
b face the top of the
cabinet. When you insert the blower unit, the
blower wire
c must be routed as shown.
Bekijk gratis de handleiding van LG MVEM1621Y, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | MVEM1621Y |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 4056 MB |
