Handleiding
Je bekijkt pagina 26 van 80
26 OPERATION
3 Connect the appliance to the Wi-Fi network
using the LG ThinQ smartphone application.
4 To disconnect the appliance from the
network, delete it from the connected
appliances in the application.
NOTE
• See the Smart Functions section in the owner’s
manual for more details.
Settings (Hour Mode, Convection
Auto Conversion, Calibrating the
Oven Temperature, Preheat Alarm
Light, Beeper Volume, Fahrenheit
or Celsius, Wi-Fi On/Off, Cooktop on
Alert Volume)
Press and hold the Clock button for 3 seconds.
Then press the Clock button repeatedly to toggle
through and change oven settings.
The Settings key allows you to:
• set the hour mode on the clock (12 or 24
hours)
• enable/disable convection auto conversion
• adjust the oven temperature
• activate/deactivate the preheating alarm
light
• set the beeper volume
• switch the temperature scale between
Fahrenheit and Celsius
• activate/deactivate the Wi-Fi
• set the cooktop on alert volume
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset
the clock to 24-hour mode, follow the steps below.
1 Press and hold Clock button for 3 seconds.
2 Press +/- to toggle between a 12-hour and 24-
hour clock.
3 Press START to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically
converts the standard recipe temperature entered
to a convection temperature by subtracting 25 °F /
14 °C. This auto-converted temperature shows on
the display. For example, select Conv. Bake, enter
350 °F, and 325 °F shows on the display after
preheat.
Convection Auto Conversion is enabled by default.
To change the setting, follow these instructions.
1 Press and hold the Clock button for 3
seconds.
2 Press Clock repeatedly until Avto appears in
the display.
3 Press +/- button to switch Auto Conversion on
or off.
4 Press START to accept the change.
Adjusting the Oven Thermostat
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself
with the new oven, you still think that it is too hot
or too cold, you can adjust the oven thermostat
yourself.
• To begin, either raise or lower the thermostat 15
°F (8 °C). Try the oven with the new setting. If the
oven still needs adjustment, raise or lower the
thermostat again, using the first adjustment as a
gauge. For example, if the adjustment was too
much, raise or lower the thermostat 10 °F (5 °C).
If the adjustment was not enough, raise or lower
the thermostat 20 °F (12 °C). Proceed in this way
until the oven is adjusted to your satisfaction.
1 Press and hold the Clock button for 3
seconds. Press Clock repeatedly until AdJU
appears in the display.
2 Set the number of degrees to adjust:
Press or press and hold the +/- buttons until
the desired number of degrees appears in the
display.
3 Press START to accept the change.
Bekijk gratis de handleiding van LG LREN6323ZE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | LREN6323ZE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 7655 MB |
