Handleiding
Je bekijkt pagina 10 van 64
P
B
L
L
I
Before Installing the Air
Conditioner
PREPARING FOR OPERATION
Refer to the Installaiton instructions included in
this manual before using the air conditioner.
Once the air conditioner has been properly
assembled and installed
ʈ Plug the power cord into its own dedicated
properly grounded outlet. Do not plug other
appliances into the same outlet. Doing so
could overload the outlet and create a fire
hazard.
ʉ Make sure the air conditioner and cord are
positioned where they do not create a tripping
hazard and will receive adequate Ventilation.
Do not place the appliance near furniture or
objects that could block the vbent openings.
ʊ Make sure that any items that could be blown
over or damaged by the airflow from the fan
are out of the airflow path.
IMPORTANT:
• Do not remain in the direct airflow from the air
conditioner for extended periods of time.
• When used at the same time as stoves,
fireplaces, and other combustion devices, make
sure there is a sufficient flow of fresh air into the
room. Do not use in tightly enclosed spaces
With these types of devices.
• This air conditioner is intended for household
use as a consumer comfort appliance. Do not
use it as a precision climate control system, or
for purposes such as cooling precision
equipment, food, pets, plants, artwork, etc.
Such items could be damaged.
• Do not bend the hose downward when Window
installation kit is not applied. lt may cause
failure of air conditioner or performance
deterioration.
UNPACKING THE AIR CONDITIONER
• Remove and store packing materials for reuse.
Remove any shipping tape before using the air
conditioner. lf the tape leaves behind any
adhesive, rub a small amount of liquid dish
soap onto it and Wipe With a damp cloth. Do
NOT use sharp instruments, alcohol, thinners,
or abrasive cleaners to remove adhesive. They
could damage the finish.
OPERATING TEMPERATURE
Cooling : 70 °F (21 °C) ~ 95 °F (35 °C),
45%RH ~ 78%RH
Wireless Remote Control
Inserting Batteries
If the display screen of the remote control begins
to fade, replace the batteries. Insert AAA (1.5 V)
batteries before using the remote control.
NOTE
• New batteries are supplied with the air
conditioner for use in the remote control.
• Do not use a rechargeable battery. Make sure
that the battery is new.
• In order to prevent discharge, remove the
battery from the remote control if the air
conditioner is not going to be used for an
extended period of time.
• Keep the remote control away from extremely
hot or humid places.
• To maintain optimal operation of the remote
control, the remote sensor should not be
exposed to direct sunlight.
• The remote control will not work properly if the
unit is exposed to direct light or there is any
obstacle between the unit and the remote
controller.
1
Remove the cover on the back of the
remote control.
Be sure to note
proper polarity!
2
Insert the new batteries and make sure that
the + and - terminals of the batteries are
installed correctly.
INSTALLATION
10
Bekijk gratis de handleiding van LG LP1025WSSM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | LP1025WSSM |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5917 MB |
