LG CordZero A941KTMP handleiding
Handleiding
Je bekijkt pagina 13 van 40
13INSTALLATION
ENGLISH
5 Drill a hole in the wall and insert the drywall
anchor b if needed.
• Before drilling, make sure that there are no
pipes or electrical wires inside the wall at
the desired location.
• For drywall anchor: use 1/4″ (6.5 mm) drill
bit
• For concrete or wall stud: use 1/8″ (3 mm)
drill bit
• If screwing into drywall, use the drywall
anchor.
6 Align the wall anchoring block c of the
charging station, and fix the charging station
to the wall by tightening the anchoring screw
d all the way.
7 Plug the power cord into the power outlet.
Using Double-Sided Tape to Secure the
Appliance
1 Use the double-sided tape a to attach the
wall anchoring block
b to the charging
station.
• Remove the center section of double-sided
tape before attaching it to the wall
anchoring block.
2 Attach the second piece of double-sided tape
to the other side of the wall anchoring block
to secure it to the wall.
• Do not use double-sided tape on wallpaper.
Wall-Mounted Installation
For wall-mounted installations, the charging
station must be attached securely to the wall using
the provided (short) wall anchoring screws.
• The detachable nozzle storage cannot be
attached to the charging station in a wall-
mounted installation.
CAUTION
• Do not use double-sided tape to attach the
charging station to wallpaper. The weight of the
charging station and the product body could
damage the paper.
• Use the stand anchoring screw on concrete or
solid walls. If the appliance is not anchored
securely and falls, it could result in damage to
property or the product.
Bekijk gratis de handleiding van LG CordZero A941KTMP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | CordZero A941KTMP |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 3773 MB |
