Handleiding
Je bekijkt pagina 23 van 52
23OPERATION
ENGLISH
3 Press OK.
Language Selection
Set the display language to English, Spanish, or
French.
Selecting a Language
1 Press SETTINGS at the center bottom of the
main screen, and press Language Selection.
2 Select the desired language.
3 Press OK.
Volume
Adjust the volume of the cooktop controls.
Setting the Volume
1 Press SETTINGS at the center bottom of the
main screen, swipe to the second settings
screen, and press Volume.
2 Select MUTE, LOW, or HIGH.
3 Press OK.
Factory Reset
This function returns all settings to the factory
defaults.
1 Press SETTINGS at the center bottom of the
main screen, swipe to the second settings
screen,and press Factory Reset.
2 If you want to reset data to the factory
defaults, press RESET and then OK.
NOTE
• All stored data will be deleted.
Open Source License
This screen contains open source software
licensing information.
1 Press SETTINGS at the center bottom of the
main screen and swipe to the second settings
screen.
2 Press Open Source License.
Before Using the Cooktop
Before using the cooktop for the first time, clean it
thoroughly with the included cleaner or ceramic
cooktop cleaner according to the Care and
Cleaning instructions in this guide. This will help
protect the ceramic surface and make future
cleanup easier.
CAUTION
• Never use abrasive scrubbing pads or cleaners.
They can cause permanent damage to the
cooktop surface.
Activating the Cooktop
To turn on the cooktop, press the POWER key for
approximately 1 second. The LCD panel will turn
on. To turn off the cooktop, press the POWER key.
NOTE
• After turning on the cooktop with the POWER
key, you must select one of the cooking zones
within 60 seconds. If no selection is made, the
cooktop will turn off for safety.
Automatic Detection
• The automatic detection function checks
whether or not a container is placed on top of
the burner.
• When a container is placed on the burner, the
words "Auto Detected" will be displayed. (The
words "Auto Detected" will disappear after 30
seconds or when the burner is running.)
•The words "Auto Detected" will not be displayed
if a container is not placed on the burner, and
this function is activated initially only once after
the power is turned on.
• Depending on the conditions of use (whether
the burner is being used, the container material,
status of the container base, etc.), the automatic
detection time may differ or the cookware may
not be detected automatically.
Bekijk gratis de handleiding van LG CBIS3018BE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | CBIS3018BE |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4547 MB |
