Handleiding
Je bekijkt pagina 23 van 28
23
MAINTENANCE
ENGLISH
• Be careful. Do not allow water to enter the top
ring.
• Clean the top plate (stainless steel) immediately
after use. It will be difficult to clean completely if
it is very dirty.
Burners
• Remove the burner lids and flame spreaders by
pulling them upwards and away from the top
plate.
• Soak them in hot water and a little detergent or
washing up liquid.
• After cleaning and washing them, wipe and dry
them carefully. Make sure that the flame holes
are clean and completely dry.
• Wipe the fixed parts of the burner cup with a
damp cloth and dry afterwards.
• Gently wipe the ignition device and flame
supervision device with a well wrung-out cloth
and wipe dry with a clean cloth.
• Do not attempt to remove the ignition device
from the cooktop or burner bases.
• Before placing the burners back on the top plate,
make sure that the injector is not blocked.
Reassemble the Auxiliary, Semi-Rapid, Rapid
and Triple-Crown Burners as follows:
1
Place the flame spreader
d
onto the burner
cup
e
so that the ignition device and the flame
supervision device extend through their
respective holes in the flame spreader. The
flame spreader must click into place correctly.
2
Position the burner lids (
a
,
b
,
c
) onto the
flame speader
d
so that the retaining pins fit
into their respective recesses.
CAUTION
• Replace parts in the correct order after cleaning.
- Do not mix up the top and bottom.
- The locating pins must fit exactly into the
notches.
Bekijk gratis de handleiding van LG CBGZ3016S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | CBGZ3016S |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2190 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Draaiknop |
| Kleur van het product | Roestvrijstaal |
| Ingebouwd display | Nee |
| Gewicht | 11800 g |
