Handleiding
Je bekijkt pagina 49 van 130
49
ENGLISH
[Input Manager]
You can set the PC or DTV label for each external input.
[SIMPLINK Setup]
• When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage.
• [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E].
• [Standby]: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command. Detailed scenarios are as
follows:
Transmission Reception
All O O
Send Only O X
Receive Only X O
[Display power (On/Off) sync]
(Depending on model)
(This function is only supported by the Signage box)
• This is a function to control the power of the Display connected to the HDMI OUT to be synchronized with the power
of the Signage box.
• When the power of the Signage box is changed from Off to On, it turns on the Display and tries to switch the input
to the Signage box screen.
• When the power of the Signage box is changed from On to Off, it turns off the Display.
• [On/Off]: Enable/Disable this function
NOTE
• It is necessary to enable the CEC function on the Display
Bekijk gratis de handleiding van LG 75XF3P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | LG |
| Model | 75XF3P |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 10454 MB |
