Lexicon 300L handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162/ 162

Afdrukken

Je bekijkt pagina 45 van 162

Lexicon

300L Owner's Manual

3-16

-24 18 12 6 0 6 +12 ovld dB

L

R

-24 18 12 6 0 6 +12 ovld dB

L

R

To disable the patch, press SETUP, press the button under the PRE slider, then

press ENTER to re-select the Setup, thereby restoring the original settings.

Page 6 is a dedicated page for naming the Setup with as many as 12 characters.

The two active sliders are sliders 1 and 6. Slider 1 selects the character. Slider

6 changes the character. We strongly encourage you to rename setups

whenever storing a setup.

If you make changes to any of the setup parameters, and want to save your

changes into a Setup Register, press STOre. The display will show:

AVAILABLE

SG: SET R 1

The top line of the display shows the name of the Register slot where the modified

Setup will be stored. If “AVAILABLE” is displayed, the register is empty.The

bottom line, which shows the register location where your setup will be stored,

will flash to indicate you are in the middle of a store routine. If you want to store

the setup into a different register than the one displayed, use the REGister slider

to select a different location. Press STOre again. The display will briefly read:

STORED

SG: SET R 1

Storing a Setup

Then will revert to the previous display (LARGE HALL SG: SET R 1).

This store process also saves the effect which is part of the Setup.

Note: The 300L has a memory protection feature which enables or disables

copying data into any of the systems internal registers, be it Setup, Program,

Time Code, or MIDI. When Copy Protect is ON, all storing functions are

inhibited. Control mode, Page 3, Slider 1 will allow you set Copy Protect ON

or OFF. For more details, see the section describing Control mode at the end

of this chapter.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162/ 162

Bekijk gratis de handleiding van Lexicon 300L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Lexicon (Niet gecategoriseerd)

Handleiding bekijken

Lexicon 300

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd