Lexicon 300 handleiding
Handleiding
Je bekijkt pagina 39 van 153
Lexicon
300 V 3.0 Owner's Manual
3-12
The front panel Soft knob is primarily used to adjust different parameter values.
This Soft knob can also be programmed (in Mod Edit mode) as a multi-parameter
controller linking one or more parameters within Setups and Effects. The control
portion of the Soft knob parameter is part of the Setup, and is set in Setup Select
mode. The PAGE UP and PAGE DOWN keys enable you to utilize the Soft knob
as a parameter controller.
Example:
Setup Preset DM 223 *Delay Daze contains two effect presets (*3Voice Dlys and
*Pingo Pongo), each of which has delay parameters mapped to the Soft knob.
Load *Dly Daze, then press PAGE UP. The screen should display:
Using the Softknob as a
Parameter Controller
or
SoftknobA: 17
DLY3 DLY4 Dst3 Dst4
SoftknobB: 17
DLY1 DLY2 RDLY Dst4
SoftknobA is the Soft knob value for Machine A
SoftknobB is the Soft knob value for Machine B
SoftknobS is the Soft knob value for Setup Parameters
Note the current Soft knob value (this particular Setup has a preset value of 17),
and the labels for the effect parameters linked to the knob (DLY3 and DLY4 for
Soft knob A; DLY1, DLY2 and RDLY for Soft knob B).
Press VALUE to display the values of these effect parameters. Remember that
the display can only show one Machine’s effect at a time, to view parameters in
the other Machine which might be linked to the Soft knob, press MACH.
Leave the display in the value mode while turning the Soft knob on the front
panel, and you will see the displayed values change. The Soft knob parameter
has a range of 127 steps.
Bekijk gratis de handleiding van Lexicon 300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lexicon |
| Model | 300 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12334 MB |
