Levenhuk Halo NVM20 handleiding
Handleiding
Je bekijkt pagina 5 van 36
5
Getting started
Install batteries
Open the battery compartment cover and insert the rechargeable battery
according to the correct polarity symbols. Close the cover.
Rechargeable battery charging
When a rechargeable battery is discharged, insert it into the battery charger
according to the correct polarity symbols. Connect the battery charger to the
AC power supply using the power cable and power adapter. Prior to using the
rechargeable battery for the first time, charge it for at least 4 hours.
Button panel and device settings
Power button
Button functions: 1) turns the device on and off; 2) confirms the selection.
Press and hold the power button for 3 seconds to turn the device on or off. Turn
the focusing wheel to adjust the focus on the viewed object. Turn the diopter
adjustment ring to make the words and icons on the display clearer.
1. Wi-Fi status
2. IR light status
3. Digital magnication
4. Time
5. Battery status
6. Compass
Le button
Button functions: 1) enters, exits, and scrolls the menu; 2) adjusts the zoom.
Press and hold the Left button for 3 seconds to enter or exit the Menu. Press the
Left button to adjust the zoom value (1х, 2х, 4х, 6x).
Menu:
Wi-Fi status settings
Time and date settings
Auto-o settings
Language settings
Brightness settings
Default settings
Right button
Button functions: 1) enters and exits the IR light mode; 2) adjusts the IR
illumination level; 3) selects the color mode.
If the present light is insufficient or it is to be used in the evening, press and hold
the Right button for 3 seconds to turn the IR light on. The image will change from
color to black and white. Press the Right button to select the brightness level.
The brightness values will be displayed on the screen.
You can select a color mode for image display in the IR light mode. For this,
1. Press and hold the Right button for 3 seconds to turn the IR light OFF.
2. Press the Right button to select the black-and-white or black-and-green color
mode (IR light OFF).
3. Press and hold the Right button for 3 seconds to turn the IR light ON. The
image color will be displayed according to the selected color mode.
Bekijk gratis de handleiding van Levenhuk Halo NVM20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Levenhuk |
| Model | Halo NVM20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4056 MB |
