Levenhuk Halo 20X PLUS handleiding
Handleiding
Je bekijkt pagina 5 van 38
5
Getting started
Charging the device
The device has a built-in rechargeable battery.
Connect the power cable to the device and the DC 5V, 2A adapter via a USB plug
and connect it to the AC power supply. When using the device for the rst time,
charge it for at least 6 hours.
Installing/removing the memory card
• The device supports memory cards class 10 up to 32GB.
• Insert the microSD card into the slot. Make sure the direction is right. Do not
force the card in.
• Format the microSD card before starting, as it will improve its compatibility
with the device.
• To remove the card from the slot, press the edge of the memory card in gently,
and the card will pop out. Then, remove the card.
!
If the memory card is not installed, a No Card icon will be displayed.
Button functions and device settings
Power button
Button functions: 1) turns the device on and off; 2) switches the color mode.
Press and hold the POWER button (2) for 3 seconds to turn the device on or off.
While the device is on, the operation status indicator (7) glows blue.
Turn the focusing wheel to adjust the focus.
Press the POWER button (2) to select the color mode: luminous green, infrared
light, and normal color mode.
!
Luminous green and infrared light are available both in usual and night
vision modes.
IR UP button
Button functions: 1) IR brightness level up; 2) zoom in (long press); 3) scroll the
menu up.
IR DOWN button
Button functions: 1) IR brightness level down; 2) zoom out (long press); 3) scroll
the menu down.
If the light is insufficient or when used in the evening, turn on the IR by pressing
the IR UP (3) button. The image will change from color to black and white.
You may select the brightness level from 1 to 7. The brightness values will be
displayed on the LCD screen.
Do not use IR in daylight. If the battery power is not enough, the IR LED level
will lower automatically. If only half power is left, the max. brightness level is 5.
If only 25% power is left, the max. brightness level is 3. If the battery power is
lower than 25%, the IR LED cannot be activated.
!
IR illumination (infrared radiation) can be detected by photo and video
cameras as well as other similar electronic devices during operation.
MENU/MODE button
Button functions: 1) enters and exits the menu; 2) switches between 3 in-built
modes: photo mode, video mode, and playback mode.
The default mode is video.
To change the settings, press the MENU/MODE button (6) and highlight the
desired menu item by scrolling up (IR UP button) or down (IR DOWN button).
Select the highlighted item by pressing the SHOT/OK button (5). In the menu, you
can select photo or video resolution, night vision sensitivity, change the language,
set the date, set auto power off, put the date on photos or videos, format the
memory card, delete the current file or all files from the memory card, etc.
SHOT/OK button
Button functions: 1) takes a picture in Photo mode; 2) starts and stops video
recording in Video mode; 3) confirms the selection.
Display information
Current mode
Night vision sensitivity
4K 2M Photo/video resolution
Recording on/off indicator
00:00:00
Remaining time of
recording
000
Remaining photos
counter
Battery status
Memory card
1.0X
Indicating the Zoom in
levels up to 8x
2022/01/01
08:00:00
Date and time of the
video/photo
Display brightness level
Indicating IR levels (1–7)
Bekijk gratis de handleiding van Levenhuk Halo 20X PLUS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Levenhuk |
| Model | Halo 20X PLUS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4629 MB |
