Levenhuk Camo 10x56 handleiding
Handleiding
Je bekijkt pagina 4 van 32
4
Calculating the target's size using angle readings
When you know the distance to the target in kilometers, you can calculate its height and width in meters using the distance
measurement formula:
,
where H is the estimated height or width of the target in m, S is the distance to the target in km, and w is the vertical or horizontal
angle of the target in mil.
For example, the estimated distance to the tank shown in g. 2 is 0.25km, the vertical angle is approximately 10mils, and the
horizontal angle is 20mils. Calculate the size using the formula:
Therefore, the tank’s height is 2.5m, and the tank’s width is 5m.
Fig. 2
Using the additional reticle to calculate distance directly
If the target’s height is known to be 2m, you can calculate the distance to it using the additional reticle on the bottom half of the lens
without using a formula. To do so, place the target on the horizontal line of the reticle. The point where the target touches the scale is
the distance in meters. For example, the distance to the tank shown in g. 3 is 550m.
Fig. 3
Specications
Magnication 10x
Objective lens diameter 56mm
Field of view 6,1°
Exit pupil diameter 4.9mm
Eye relief 17mm
Relative brightness 24
Twilight factor 24
Close focus 3.5m
Tripod adapter thread 1/4"
Operating temperature range –10… +50°C / +14… +122°F
The manufacturer reserves the right to make changes to the product range and specications without prior notice.
Bekijk gratis de handleiding van Levenhuk Camo 10x56, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Levenhuk |
| Model | Camo 10x56 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7566 MB |
