Levenhuk Atom Digital DNM200 handleiding
Handleiding
Je bekijkt pagina 3 van 25
3
EN
Levenhuk Atom Digital DNM200 Night Vision Monocular
Never, under any circumstances, look directly at the Sun, another bright source of light, or at a laser through this
device, as it may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS.
Specications
Magnication, x 1–8 (digital), 5 (optical)
Objective lens diameter, mm 43
Close focus, m/ 5/16
Observation distance, m/ 100 (in complete darkness)
3–400 (in weak light) /
328 (in complete darkness)
10–1312 (in weak light)
Tripod adapter thread 1/4"
Operating temperature range, °C/°F −20…+60 (operating), −30…+70 (storage)/
−4…+140 (operating), −22…+158 (storage)
IR-illumination IR LEDs 3W (6 brightness levels)
IR wavelength, nm 715
Recording time with illumination (IR), h 6
Recording time without illumination (IR), h 10
Power supply 18650 battery
Operation voltage 3.7V
Storage built-in 8GB SD-card
Image format and resolution JPEG, 1920x1080px
Video format and resolution MP4, 1920x1080px@30fps
Dimensions, mm/in 222x82x66 / 8.7x3.2x2.5
Weight, g/lb 500 / 1.1
The manufacturer reserves the right to make changes to the product range and specications without prior notice.
Getting started
This device has a built-in 8GB MicroSD card. A photo or video will be saved automatically.
Install batteries
Open the battery compartment cover and insert the battery according to the correct polarity marks. Close the cover.
Button panel and device settings
ON/OFF/OK button
Press and hold the ON/OFF/OK button for 3 seconds to turn the device on or o.
Turn the focusing wheel to adjust the focus.
Button functions: 1) takes a picture in Photo mode; 2) starts and stops video recording in Video mode; 3) enters the sub-menu.
Notes:
• If the device fails to activate, check for defective or improperly installed batteries. Always only use the recommended batteries.
• If you wear glasses, keep them on while using the device.
• Video is recorded without sound.
UP button / DOWN button
Button functions: 1) IR brightness level up/down; 2) Zoom in/out; 3) scroll the menu.
IR button
If the light is insucient or when used in the evening, turn on the IR by pressing the IR button. The image will change from color to
black and white. You may select the brightness level from 1 to 6. The brightness values will be displayed on the LCD screen.
Notes:
• Do not use IR in daylight (when IR is on, you will have a color image, when IR is o — black and white image).
• If the battery power is not enough, the IR LED level will lower automatically. If only half power is le, the max. brightness level is 5.
If only 25% power is le, the max. brightness level is 3. If the battery power is lower than 25%, the IR LED cannot be activated.
Bekijk gratis de handleiding van Levenhuk Atom Digital DNM200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Levenhuk |
| Model | Atom Digital DNM200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3763 MB |
