Handleiding
Je bekijkt pagina 25 van 44
Chapter 2. 2-9
Selecting a supported display mode
The display mode of the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat
Panel technology is inherently flicker-free.
The monitor adopts Flicker-Free technology, which clears the eye visible flicker ,
brings comfort viewing experience and preventing users suffer from eye strain and
fatigue.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to
reattach the CRT monitor temporarily until you have re-configured the system;
preferably to 3840 x 2160 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Timing Refresh rate(Hz) Remark
640x480 60 Hz
800x600 60 Hz
1024x768 60 Hz
1280x720 60 Hz
1280x800 60 Hz
1280x1024 60 Hz
1440x900 60 Hz
1600x900 60 Hz
1680x1050 60 Hz
1920x1080 60 Hz
1920x1200 60 Hz
2560x1440 60 Hz
3840x2160 60 Hz
3840x2160 48Hz
3840x2160 75Hz
This Timing is only supported
on DP ports, and the max
color depth will be set to 8-bit.
Bekijk gratis de handleiding van Lenovo ThinkVision T27UD-40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | ThinkVision T27UD-40 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3588 MB |
