Handleiding
Je bekijkt pagina 16 van 41
Chapter 1 Getting started 1-9
7. Connect one end of the USB cable to the USB downstream terminal of the monitor, and connect the
other end of the USB cable to an appropriate USB port on your device.
Note 1: The USB downstream port does not provide power while the monitor is switched off. (To use
top port USB, first remove the rubber cover）
Note 2: Power output for USB-A: 5V/0.9A, Type-C: 5V/3A, USB-BC1.2: 5V/2.4A. (To use top port
USB, first remove the rubber cover)
If there are any * tag, you can consult the comments on page 1-1.
8. Plug the monitor power cord and the computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant national
installation and/or equipment regulations shall be considered. A certified power supply cord not
lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-
F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be of
synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used.
9. After attaching all necessary cables to your monitor and computer, organize all cables as shown
below.
Bekijk gratis de handleiding van Lenovo ThinkVision T27-40, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | ThinkVision T27-40 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 4908 MB |
