Handleiding
Je bekijkt pagina 27 van 37
Troubleshooting
If you have a problem setting up or using your monitor, you might be able
to solve it yourself. Before calling your dealer or Lenovo, try the suggested
actions that are appropriate to your problem.
Table 3-2. Troubleshooting
Problem Possible cause Suggested action Reference
The words
“Out of Range”
are shown on
the screen, and
the power
indicator is
flashing white.
The system is set to
a display mode
which is not
supported by the
monitor
• If you are replacing an old
monitor, reconnect it and
adjust the display mode to
within the specified range
for your new monitor.
• If using a Windows
system, restart the system
in safe mode, then select
a supported display mode
for your computer.
• If these options do not
work, contact the
Customer Support Centre.
“Selecting a
supported
display mode”on
page 2-7
The image
quality is
unacceptable
The video signal cable
is not connected with
the monitor or system
completely.
Be sure the signal cable is
firmly plugged into the
system and monitor.
“Connecting and
turning on your
monitor”on page
1-4
The color settings may
be incorrect.
Select another color
setting from the OSD
menu.
“Adjusting your
monitor image”on
page 2-3
The automatic image
setup function was not
performed.
Perform automatic image
setup.
“Adjusting your
monitor image”on
page 2-3
The power
indicator is not
lit and there is
no image.
• The monitor’s
power switch is
not switched on.
• The power cord is
loose or
disconnected.
• There is no power
at the outlet.
• Be sure the power cord
is connected properly.
• Be sure the outlet has
power.
• Power on the monitor.
• Try using another
power cord.
• Try using another electrical
outlet.
“Connecting and
turning on your
monitor”on page
1-4
Screen is blank
and power
indicator is
amber.
The monitor is in
Standby/Suspend
mode
• Press any key on the
keyboard or move the
mouse to restore operation.
• Check the Power options
settings on your computer.
“Understanding
power
management”on
page 2-8
The power
indicator is
amber, but there
is no image
The video signal
cable is loose or
disconnected from
the system or monitor
Be sure the video cable
is connected with the
system properly
“Connecting and
turning on your
monitor”on page
1-4
The monitor brightness
and contrast are at the
lowest setting.
Adjust the brightness
and contrast setting on
the OSD menu.
“Adjusting your
monitor image”on
page 2-3
One or more of
the pixels appear
discolored
This is a characteristic of
the LCD technology and
is not an LCD defect
If there are more than five
pixels missing, contact the
Support Center
“Appendix A. Service
and Support”on page
A-1
Chapter 3.Reference information 3-3
Bekijk gratis de handleiding van Lenovo ThinkVision S22e-30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | ThinkVision S22e-30 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3419 MB |
