Handleiding
Je bekijkt pagina 21 van 37
Selecting a supported display mode
The display mode of the monitor uses is controlled by the computer. Therefore,
refer to your computer documentation on how to change display modes.
The image size, position and shape might be changed when the display mode
changes. This is normal and the image can be re-adjusted using automatic image
setup and the image controls. Unlike CRT monitors, which require a high refresh
rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to
reattach the CRT monitor temporarily until you have re-configured the system;
preferably to 1920 x 1080 at 75 Hz, which is a common display mode.
The display modes shown below have been optimized at the factory.
Table 2-3 Factory set display modes
2-7 S22i-30 Flat Panel Monitor User’s Guide
Address ability Refresh rate
720x400 70 Hz
640x480 60 Hz,72 Hz,75 Hz
720x480 60 Hz
720x576 50 Hz
800x600 56 Hz,60 Hz,72 Hz,75 Hz
832x624 75 Hz
1024x768 60 Hz,70 Hz,75 Hz
1280x720 50 Hz,60 Hz
1280x1024 60 Hz,70 Hz,75 Hz
1440x900 60 Hz
1600x900 60 Hz,75 Hz
1680x1050 60 Hz
1152x864 75 Hz
1366x768 60 Hz
1920x1080 50 Hz,60 Hz,75 Hz
480p 60 Hz
576p 50 Hz
720p 50 Hz,60 Hz
1080p 50 Hz,60 Hz
Bekijk gratis de handleiding van Lenovo ThinkVision S22e-30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | ThinkVision S22e-30 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3419 MB |
