Lenovo ThinkPad X1 2-in-1 Gen 9 Handleiding (98 Pagina's)

Handleiding

Chapter 7. FRU replacement notices

Read this chapter carefully before replacing any FRU.

Service tool kit

Ensure that the following service tool kit is prepared before you service a notebook computer.

No. Tool name Tool type

1 Phillips-head screwdriver Common tool

2

Conductive tweezers Common tool

3 Pry tool Common tool

4

Silicone grease Consumable tool

5

Polyamide tape Consumable tool

6 Mylar tape

Consumable tool

7 Eraser

Consumable tool

8 Electrical tape

Consumable tool

9 Double-sided tape

Consumable tool

10

Conductive tape Consumable tool

11

0.5mm thickness SSD thermalpad Consumable tool

12

Trackpad jig (this might come with trackpad) Consumable tool

Note: The silicone grease can be applied to the surfaces of the microprocessor and heat sink to eliminate air

gaps. For parts with silicone grease applied, it is suggested that you apply new grease during the installation.

Screw notices

Loose screws can cause a reliability problem. In your computer, this problem is addressed with special

nylon-coated screws that have the following characteristics:

• They maintain tight connections.

• They do not easily come loose, even with shock or vibration.

• They are harder to tighten.

Do the following when you service the computer:

• Keep the screw kit in your tool bag. For the part number of the screw kit, go to:

https://support.lenovo.com/partslookup

Tighten screws as follows:

• Plastic to plastic

Turn an additional angle of 90 degrees after the screw head touches the surface of the plastic part.

Bekijk gratis de handleiding van Lenovo ThinkPad X1 2-in-1 Gen 9, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.