Handleiding
Je bekijkt pagina 50 van 68

4. Remove the base cover assembly. See “Base cover assembly” on page 34.
5. Remove the built-in battery. See “Built-in battery” on page 36.
Step 1. Remove the coin-cell battery as shown below.
Step 2. Install the coin-cell battery in reverse order.
Thermal fan
Follow the instructions to replace the thermal fan.
Before you start, read
Generic Safety and Compliance Notices.
Attention: When handling the thermal fan, observe the following guidelines:
• Do not press the top of the fan cover and the fan hub. Otherwise, the fan might get damaged.
• Keep the connector of the board and the contact edge of the fan clean.
For access, do the following:
1. Disable Fast Startup and the built-in battery. See “Before you replace any CRU” on page 34.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
4. Remove the base cover assembly. See “Base cover assembly” on page 34.
Tool needed: Phillips-head screwdriver
Step 1. Remove the thermal fan as shown below.
Note: Put your finger on the area as shown by arrows on the thermal fan when you remove the
thermal fan.
42
ThinkPad L13 Gen 6, ThinkPad L13 2-in-1 Gen 6, ThinkPad L13 Gen 6 AMD, ThinkPad L13 2-in-1 Gen 6 AMD, ThinkPad S2 Gen
10, ThinkPad S2 2-in-1 Gen 10 Linux User Guide
Bekijk gratis de handleiding van Lenovo ThinkPad L13 2-in-1 Gen 6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | ThinkPad L13 2-in-1 Gen 6 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 8194 MB |







