Lenovo ThinkPad L13 2-in-1 Gen 6 handleiding

Laptop

Lenovo

68 pagina's

PDF beschikbaar

Handleiding

The following information is only for the computer with user-installable modules. Ensure that you use only a

Lenovo-authorized wireless module specifically tested for this computer model. Otherwise, the computer will

generate an error-code beep sequence when you turn on the computer.

Before you start, read

Generic Safety and Compliance Notices.

Notes:

• Wireless WAN ready model identifies that product has preinstalled wireless WAN antennas and allows a

user-installable wireless WAN module.

• Only wireless WAN model or wireless WAN ready model is allowed to install the optional Lenovo wireless

WAN module.

Attention: Do not touch the contact edge of the wireless WAN module. Otherwise, the wireless WAN

module might get damaged.

For access, do the following:

1. Disable Fast Startup and the built-in battery. See “Before you replace any CRU” on page 34.

2. Turn off the computer and disconnect the computer from ac power and all connected cables.

3. Close the computer display and turn over the computer.

4. Remove the base cover assembly. See “Base cover assembly” on page 34.

Tools needed:

• Phillips head screwdriver

• Pry tool

Step 1. Remove the wireless WAN module and its bracket as shown below.

Step 2. Install the wireless WAN module in reverse order.

Chapter 6. CRU replacement 39

Bekijk gratis de handleiding van Lenovo ThinkPad L13 2-in-1 Gen 6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.