Lenovo ThinkPad L13 2-in-1 Gen 6 handleiding

Laptop

Lenovo

68 pagina's

PDF beschikbaar

Handleiding

What to do if you forget your system management password

If you forget your system management password, do the following to remove the system management

password:

• If you have set a supervisor password and remember it:

1. Restart the computer. When the logo screen is displayed, immediately press F1.

2. Type the supervisor password to enter the UEFI BIOS menu.

3. Select Security ➙ Password ➙ System Management Password by using the arrow keys.

4. Type the current supervisor password in the Enter Current Password field. Then, leave the Enter

New Password field blank, and press Enter twice.

5. In the Changes have been saved window, press Enter.

6. Press F10 to save changes and exit the UEFI BIOS menu.

• If you have not set a supervisor password, contact a Lenovo authorized service provider to have the

system management password removed.

Use Power Loss Protection function (for selected models)

For models shipped with an NVMe (Non-Volatile Memory express) M.2 solid-state drive, the M.2 solid-state

drive features the Lenovo-unique PLP (Power Loss Protection) function to avoid data loss or damage. On

very rare occasions, your computer is not responding and you might have to shut down your computer by

pressing and holding the power button for about seven seconds. In this case, the PLP function enables key

data of your computer to be saved timely. However, there is no guarantee that all data is saved in any

situation. To check the type of your M.2 solid-state drive:

Step 1. Restart the computer. When the logo screen is displayed, press F10 to enter the Lenovo

diagnostics window.

Step 2. On the TOOLS tab, select SYSTEM INFORMATION ➙ STORAGE using the arrow keys.

Step 3. Locate the Device Type section to check the information.

USB-C Restricted Mode

USB-C Restricted Mode is a security feature that allows you to disable data transfer through USB-C

connectors while the charge function of the USB-C connectors is kept. It helps prevent data from being

copied from the computer to USB storage devices connected to the computer. By enabling this feature, you

can use public USB charging stations, such as those found in cafes and hotel lobbies, without worrying

about data leakage from the USB-C connector.

Notes:

• Before using this feature, ensure that the remaining battery power is not less than 5%. Otherwise, this

feature can not be enabled.

• This feature can be enabled or disabled by key combinations only when the computer is turned on.

To enable or disable this feature, press Fn + U, and then press Fn + S.

After this feature is enabled, the LED indicator blinks briefly when a USB device is connected.

ThinkPad L13 Gen 6, ThinkPad L13 2-in-1 Gen 6, ThinkPad L13 Gen 6 AMD, ThinkPad L13 2-in-1 Gen 6 AMD, ThinkPad S2 Gen

10, ThinkPad S2 2-in-1 Gen 10 Linux User Guide

Bekijk gratis de handleiding van Lenovo ThinkPad L13 2-in-1 Gen 6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.