Handleiding
Je bekijkt pagina 115 van 126
Step 2. Before installing the built-in battery, thoroughly check the battery compartment and ensure that
there are no foreign or sharp objects that could cause damage to the battery.
Step 3. Install the built-in battery in reverse order.
When installing:
• Ensure that the connector is attached firmly.
• Ensure that the base cover assembly is secured in place. Otherwise, the battery connection
might fail.
Speaker assembly
Follow the instructions to replace the speaker assembly.
Before you start, read
Generic Safety and Compliance Notices.
For access, do the following:
1. Disable Fast Startup and the built-in battery. See “Before you replace any CRU” on page 99.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
4. Remove the base cover assembly. See “Base cover assembly” on page 100.
Step 1. Disconnect the speaker assembly cable and remove the speaker assembly as shown below.
Chapter 8. CRU replacement 107
Bekijk gratis de handleiding van Lenovo ThinkPad E14 Gen 7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | ThinkPad E14 Gen 7 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 13369 MB |
