Handleiding
Je bekijkt pagina 44 van 55
Chapter 3. 3-6
Troubleshooting
If you have a problem setting up or using your monitor, you might be able to solve it yourself.
Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your
problem.
Table 3-2. Troubleshooting
Problem Possible cause Suggested action Reference
The words "Out of
The system is set to a
• If you are replacing an old
"Selecting a
rangege" are
display mode which is
monitor, reconnect it and
supported display
shown on the
not supported by the
adjust the display mode to
mode"on page 2-15
screen, and the
monitor.
within the specified rangege
power indicator is
for your new monitor.
flashing green.
• If using a Windows system,
restart the system in safe
mode, then select a
supported display mode for
your computer.
• If these options do not work,
contact the Support Center.
The image quality The video signal cable
Be sure the signal cable is firmly "Assembling your
is unacceptable. is not connected with
plugged into the system and monitor"on page 1-6
the monitor or system
monitor.
completely.
The color settings Select another color setting from "Adjusting your
may be incorrect. the OSD menu. monitor image"on
page 2-10
The automatic image Perform automatic image setup. "Adjusting your
setup function was not monitor image"on
performed. page 2-10
The power
• The monitor’s
• Be sure the power cord is "Assembling your
indicator is not lit
power switch is
connected properly. monitor"on page 1-6
and there is no
not switched on.
• Be sure the outlet has power.
image.
• The power cord
• Power on the monitor.
is loose or
disconnected.
• Try using another power
cord.
• There is no
power at the
• Try using another electrical
outlet.
outlet.
Screen is blank The monitor is in • Press any key on the "Understanding
and power Standby/Suspend keyboard or move the power
indicator is amber. mode. mouse to restore operation. management"on page
2-16
• Check the Power Options
settings on your computer.
The power
The video signal cable
Be sure the video cable is "Assembling your
indicator is amber,
is loose or
connected with the system monitor"on page 1-6
but there is no
disconnected from the
properly.
image.
system or monitor.
The monitor
Adjust the brightness and "Adjusting your
brightness and
contrast setting on the OSD monitor image"on
contrast are at the
menu. page 2-10
lowest setting.
Bekijk gratis de handleiding van Lenovo ThinkCentre TIO27, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | ThinkCentre TIO27 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 5625 MB |
