Handleiding
Je bekijkt pagina 58 van 76
Figure 39. Release the antennas and cable, remove four screws and remove the system board
Screw specifications
Number of screws
Torque force (kgf.cm)
M2 × L5 2 1.85 ± 0.15
M2 × L3 2 1.85 ± 0.15
Go to
https://support.lenovo.com/partslookup to look up the Lenovo part numbers of the following
replacement parts:
System board
System board hook
Use a Golden Key U1 tool to flash-write key id information
After replacing the system board and re-assembling the computer, use a pre-made Golden Key U1 tool to
start the computer and flash-write the serial number (SN), machine type (MT), product name (PN), and UUID
to the new system board.
The Golden Key U1 tool is prepared by running the U1 Update software on a FAT32-formatted USB thumb
drive. Go to
https://support.lenovo.com/us/en/solutions/ht102004 for detailed instructions on how to create
and use a Golden Key U1 tool.
Remove the thermal fin
Make sure the following FRUs (CRUs) have been removed.
“Remove the lower case” on page 29
“Remove the battery pack” on page 30
“Remove the memory shielding and the memory module” on page 31
“Remove the SSD” on page 32
“Remove the Wi-Fi card” on page 41
“Remove the HDMI bracket” on page 42
“Remove the DC-in bracket” on page 43
52
Lenovo ThinkBook 16p Gen 5 Hardware Maintenance Manual
Bekijk gratis de handleiding van Lenovo ThinkBook 16p G5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | ThinkBook 16p G5 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 15839 MB |
