Handleiding
Je bekijkt pagina 23 van 29
Chapter 3 Reference information 3-4
Table 3-2. Troubleshooting
Problem Possible cause Suggested action Reference
The power
indicator is amber,
but there is no
image�
The video signal
cable is loose or
disconnected from the
system or monitor�
Be sure the video
cable is connected
with the system
properly�
“Connecting and
turning on your
monitor” on page 1-4
The monitor brightness
and contrast are at the
lowest setting�
Adjust the brightness
and contrast setting
on the OSD menu�
“Adjusting your
monitor image” on
page 2-3
One or more of
the pixels appear
discolored�
This is a characteristic
of the LCD technology
and is not an LCD
defect�
If there are more than
five pixels missing,
contact the Support
Center�
“Appendix A� Service
and Support” on page
A-1
• Lines or images
are blurred in the
text�
• There are
horizontal or
vertical lines in
images�
• Image setup has not
been optimized�
• The “Display
Properties” settings of
your system have not
been optimized�
According to the
resolution of the
monitor itself, adjust
the resolution setting
of the system:
2560 x 1440 @ 60 Hz
“Adjusting your
monitor image” on
page 2-3
Perform automatic
image setup� If
automatic image
setup does not help,
perform manual
image setup�
“Selecting a supported
display mode” on
page 2-7
When working in the
native resolution, you
may find additional
improvements by
adjusting the Dots
Per Inch (DPI) setting
on your system�
See the Advanced
section of your
system’s display
properties�
Bekijk gratis de handleiding van Lenovo L27qe, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | L27qe |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2111 MB |
