Handleiding
Je bekijkt pagina 27 van 33
Troubleshooting
If you have a problem setting up or using your monitor, you might be able to solve
it yourself. Before calling your dealer or Lenovo, try the suggested actions that are
appropriate to your problem.
Table 3-2. Troubleshooting
Problem Possible cause Suggested action Reference
The words” Input
The system is set to a
• If you are replacing an old
"
Selecting a
Not Supported”
display mode which is
monitor, reconnect it and
supported display
are shown on
not supported by the
adjust the display mode to
mode" on page
the screen,
monitor
within the specied range
2-8
for your new monitor.
and the power
• If using a Windows
indicator is
system, restart the system
ashing Orange.
in safe mode, then select
a supported display mode
for your computer.
• If these options do
not work, contact the
Customer Support Centre.
The image The video signal cable
Be sure the signal cable "Connecting and
quality is is not
is rmly plugged into the turning on your
unacceptable connected with the
system and monitor. monitor" on page
monitor or system
1-6
completely.
The color settings may Select another color setting "Adjusting your
be incorrect.
from the OSD menu.
monitor image" on
page 2-4
The automatic image Perform automatic image "Adjusting your
setup function was not
setup.
monitor image" on
performed. page 2-4
The power
• The monitor’s
• Be sure the power cord
"Connecting and
indicator is not lit
power switch is
is connected properly.
turning on your
and there is no
not switched on.
• Be sure the outlet
monitor" on page
image.
• The power
has power.
1-6
cord is loose or
• Power on the monitor.
disconnected.
• Try using another
• There is no power
power cord.
at the outlet.
• Try using another
electrical outlet.
Screen is blank
The monitor is in • Press any key on
“Understanding
and power
Standby / Suspend
the keyboard or
power
indicator is
mode
move the mouse to
management” on
amber.
restore operation.
page 2-9
• Check the Power options
settings on your computer.
The power
The video signal
Be sure the video cable is "Connecting and
indicator is
cable is loose or
connected with the system turning on your
amber, but there
disconnected from the
properly monitor" on page
is no image
system or monitor
1-6
The monitor brightness Adjust the brightness and "Adjusting your
and contrast are at the contrast setting on the OSD monitor image" on
lowest setting. menu. page 2-4
Appendix A. Service and Support 3-3
Bekijk gratis de handleiding van Lenovo L27-4e, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | L27-4e |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2544 MB |
