Handleiding
Je bekijkt pagina 39 van 58
Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement
part:
Type-C bracket
Remove the heat sink
Make sure the following FRU (or CRU) has been removed.
“Remove the lower case” on page 28
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Loosen three screws and then remove the heat sink.
Figure 14. Remove the heat sink
Go to https://support.lenovo.com/partslookup to look up the Lenovo part number of the following replacement
part:
Heat sink
Related topics
“Handling thermal interface materials ” on page 26
Remove the fans
Make sure the following FRU (or CRU) has been removed.
“Remove the lower case” on page 28
“Remove the heat sink” on page 33
Step 1. Detach the fan cable connectors and then release the cables from the cable guide.
Chapter 4. Removing a FRU or CRU 33
Bekijk gratis de handleiding van Lenovo IdeaPad Pro 5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | IdeaPad Pro 5 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 10575 MB |
