Handleiding
Je bekijkt pagina 79 van 100
Step 2. Install the coin-cell battery in reverse order.
When installing:
• Ensure that the connector is attached firmly.
• Reset the system date and time in the UEFI BIOS menu.
M.2 solid-state drive and M.2 solid-state drive bracket
Follow the instructions to replace the M.2 solid-state drive and its bracket.
Before you start, read
Generic Safety and Compliance Notices.
Attention: If you replace a M.2 solid-state drive, you might need to install a new operating system. For
details on how to install a new operating system, see “Install a Windows operating system and drivers” on
page 49.
The M.2 solid-state drive is sensitive. Inappropriate handling might cause damage and permanent loss of
data.
When handling the M.2 solid-state drive, observe the following guidelines:
• Replace the M.2 solid-state drive only for repair. The M.2 solid-state drive is not designed for frequent
changes or replacement.
• Before replacing the M.2 solid-state drive, make a backup copy of all the data that you want to keep.
• Do not apply pressure to the M.2 solid-state drive.
• Do not touch the contact edge or circuit board of the M.2 solid-state drive. Otherwise, the M.2 solid-state
drive might get damaged.
• Do not subject the M.2 solid-state drive to physical shocks or vibration. Put the M.2 solid-state drive on a
soft material, such as cloth, to absorb physical shocks.
For access, do the following:
1. Disable Fast Startup and the built-in battery. See “Before you replace any CRU” on page 66.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
Chapter 7. CRU replacement 73
Bekijk gratis de handleiding van Lenovo 13w 2-in-1 Gen 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | 13w 2-in-1 Gen 3 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 12729 MB |
