Handleiding
Je bekijkt pagina 73 van 100
the pen, go to https://www.lenovo.com/accessories. To use the pen, see “Use Lenovo Integrated Pen (for
selected models)” on page 15.
For access, do the following:
1. Ensure that your computer is off or in sleep mode. Disconnect the computer from ac power and all
connected cables.
2. Close the computer display and turn the computer over.
Step 1. Remove the Lenovo Integrated Pen or pen dummy as shown below.
Step 2. Install the Lenovo Integrated Pen or pen dummy in reverse order.
Base cover assembly
Follow the instructions to replace the base cover assembly.
Before you start, read
Generic Safety and Compliance Notices.
Note: Do not remove the base cover assembly when your computer is connected to ac power. Otherwise,
there might be a risk of short circuits.
For access, do the following:
1. Disable Fast Startup and the built-in battery. See “Before you replace any CRU” on page 66.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
4. Remove the Lenovo Integrated Pen or pen dummy. See “Lenovo Integrated Pen and pen dummy (for
selected models)” on page 66.
Tools needed:
• Phillips-head screwdriver
• Pry tool
Step 1. Remove the base cover assembly as shown below.
Chapter 7. CRU replacement 67
Bekijk gratis de handleiding van Lenovo 13w 2-in-1 Gen 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lenovo |
| Model | 13w 2-in-1 Gen 3 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 12729 MB |
