Lelit Mara X handleiding
Handleiding
Je bekijkt pagina 8 van 32
8
MaraX - PL62X
5. Packing
The packaging of your coffee machine has been studied and produced to be re-
used. Save the box and all the packaging material for the entire warranty period
and, if possible, even after.
Use the original box and all the packaging elements in case you need to send
the machine back to your reseller or to an authorized service centre, for ordinary
or extraordinary maintenance.
Please consult your LELIT reseller before shipping the machine away and follow
his eventual specic instructions.
6. First start-up
6.1 6.2 6.3
FRONT
30
sec
Attention. Remove the machine from its packing and follow the instructions
printed on the box. Your product is heavy; lifting it may result in injury. It should
be carried carefully by two people.
Place the machine on a solid, at and dry surface and make sure the appliance
is stable.
From the equipment box, take out the drip tray (17), the wire grate (11), the cover
(1) and position them as indicated in Pic. 2.
Attention. Do not install the water softener lter, please run the rst start-up
and proceed with the water softener lter installation only afterwards.
Fill the water tank (10) with room temperature water up to the indicated maximum
level and insert it in its seating (Pic 6.1). Use the power cord (K) to connect the
machine to the electrical mains and turn ON the machine by pressing the ON/
OFF (8) switch. If the water tank (10) is full of water and properly inserted in
its seating, the pilot light (5) goes ON (Pic 6.2). The hydraulic circuit will need
maximum 4 minutes from the 1st turn on to get lled with water. Once the
Bekijk gratis de handleiding van Lelit Mara X, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Lelit |
| Model | Mara X |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2687 MB |
